M
anagement System
ISO 9001:2015
ISO 14001:2015
Marshallstraat 18c, 5705 CN Helmond
Tel:+31-655701610
soldersolutions@ishikawa-europe.com
Special activater enables rapid heating SMT by LASER.Solution of solder ball by reducing slumps in heat.
●Comparison of solder ball
No solder ball by rapid heating
1608 chip
LASER power:8W
Enables SMT of complicated PCB for various parts large and small from the chip to the connector.
●Comparison of solder ball of connector parts
| Prevention of solder ball for large component 2.5mm pitch connector Beam power:40W |  |
Approved by SMT of automotive electrical components more than 10 years.Suitable for higher requirement about SMT quality and reliability.
●Confirmation the shape with LASER heating
No slumps in heat, Preventing”Bridge”for large component.
2.5mm pitch connector
Beam power:40W
| Alloy type | J3 (Sn:Bal / Ag 3.0 / Cu 0.5) R4 (Sn:Bal / Ag 0.3 / Cu 0.7) |
|---|---|
| Flux type | MIL-RMA |
| Halide contents | 0.08％～0.1％ |
| Powder particle size（μm） | 45～25(Type 3) 38～20(Type 4) |
| Flux contents（％） | 14.0% |
| Deterioration（Pa・S） | 130 |
| Copper plate corrosion test | No corrosion |
| Copper mirror corrosion | No corrosion |
| Insulation resistance（Ω） | More than 5.0×108Ω |
| Electrochemical migration | No migration |
| Flux name | 3229 |
Copyright © Ishikawa Metal Co.,LTD. All Rights Reserved.
Products